 |
 |
 |
|
This product is intended for most users of ANY tripod mounts. Once you have attached your tripod's quick release plate to our plate, you can switch easily between your tripod and your Cotton Carrier Camera Vest or Side Holster only using the NOT INCLUDED Camera Hub
We now offer compatibility with the Arca Swiss-compatible, Manfrotto, Gitzo and other brands of quick release tripod systems with our Universal Adapter Plate (model #755CUP.3).
IMPORTANT: Along with using an Allen Key to secure your Cotton Carrier Camera Hub, we strongly recommend you use a thread locker, such as LocTiteŽ 425 ONLY, as this is a fast curing, low strength adhesive for locking metal and plastics fasteners. If you have any spillage, it is advised to use an Acetone cleaner for any excess.
Although it should not be required with sufficient tightening of the camera hub that causes compression of the rubber washer, you may wish to use an added measure of security to keeping your camera hub on by using a NON-PERMANENT, PLASTIC SAFE Thread Locker (e.g. LocTite 425).
Other LocTiteŽ or similar products may not be suitable for use, and are not recommended.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- accepts any 1/4" threaded Quick Release Plate
- construction for rugged dependability
- no other plates, clamps or adapters necessary
- CAMERA HUB NOT INCLUDED
- NOTE FOR VIDEO HEAD USERS*: You will ALSO need our 733QRS Quick Release Clamp (with spacer) to use with your tripod. We have determined that this is the best solution to allow you fast mounting to your tripod and to avoid having their long quick release plate mounted to our plate at a perpendicular angle (T-shape). In effect, you will then be able to leave your original video tripod plate (with our clamp attached) in place all the time and simply use our Universal Quick Release Plate to go back and forth to your Cotton Carrier. You'll appreciate the convenience and less bulk. If you wish to confirm compatibility before purchase, don't hesitate to email us your exact tripod model or drop us a line at 1-877-852-9423.
- Our clamp costs $59, but if you wish for an already-integrated solution, Kirk makes this: http://www.kirkphoto.com/SQRC-501PL_Manfrotto_Quick_Release_Clamp.html# The photos there will give you a great idea of how our clamp would attached to your current video head plate.
- *Examples would be the Manfrotto 501HDV, 503HDV, 701HDV, 519 heads; Gitzo G1380, G2180, G2380; most Sachtler & Vinten heads.
- NOTE FOR MANFROTTO RCO USERS: You will ALSO need our 733QRS Quick Release Clamp (with spacer) to use with your tripod. We have determined that this is the best solution to allow you fast mounting to your tripod and to avoid having their rather cumbersome quick release plate mounted to our plate and blocking mounting to the Cotton Carrier. In effect, you will then be able to leave your original Manfrotto RC0 plate (with our clamp attached) in place all the time and simply use our Universal Quick Release Plate to go back and forth to your Cotton Carrier. You'll appreciate the convenience and less bulk. If you wish to confirm compatibility before purchase, don't hesitate to email us your exact tripod model or drop us a line at 1-877-852-9423.
|
|
|
|
|
|
|
Click to Verify
