Cotton Carrier CAMERA SYSTEM for Large Professional Bodies or Battery-gripped Cameras

Home > Systems for Two Cameras >

Alternative Views:

The Cotton Carrier Camera System consists of a Vest Unit and a removable Side Holster that allows you to keep a second camera on your Vest Unit, or remove and place independently on your pant belt or the waist strap of your favorite camera bag.

Only $149.00

Ordering in Quantity? Important Shipping Instructions at Checkout!
Located in ASIA or EUROPE? See our LOW promotional rate to select regions.
Located in AUSTRALIA? Orders now shipped by Australia Post overnight!

Availability:: Usually Ships in 24 Hours
Product Code: 111PRO

Qty:

Specifications

Additional Information

Compatibility with Tripod Mounts

The Cotton Carrier can also be used with many of the popular tripod quick release adapters. Please note that we provide this information as a convenience to our customers and can offer no direct support for your specific configuration. We encourage you to visit the website of your product's manufacturer.

In short, you need to match whatever camera plate your tripod head is using. The Cotton Carrier Camera Insert will mount onto any quick release adapter or clamp that has a 1/4" threaded hole on the underside. Some products require (or include) a 1/4" to 3/8" threading bushing.

EXAMPLES:

If you use the Bogen Manfrotto system: consider the 323 RC2 or 394 RC4

If you use the Velbon system: consider the QRA-667L Quick Release Adapter and Plate Assembly

If you use the Kirk, Arca-Swiss, Markins, Really Right Stuff* or other tripod systems using Arca-Swiss plates: consider the Kirk QRC-2 Quick Release Clamp (which features a threaded 1/4" hole)

*If you already own a Really Right Stuff quick release clamp such as the B2-40 LR or B2-mAS which has a non-threaded hole, you will need to order our Really Right Stuff (RRS) Adapter Kit.

IMPORTANT: Along with using an Allen Key and screw driver to secure your RRS Quick Release Clamp to the Cotton Carrier Hub, we strongly recommend you use a thread locker, such as LocTite® 425 ONLY, as this is a fast curing, low strength adhesive for locking metal and plastics fasteners. If you have any spillage, it is advised to use an Acetone cleaner for any excess.

Although it should not be required with sufficient tightening of the camera hub that causes compression of the rubber washer, you may wish to use an added measure of security to keeping your camera hub on by using a NON-PERMANENT, PLASTIC SAFE Thread Locker (e.g. LocTite 425).

Other LocTite® or similar products may not be suitable for use, and are not recommended.

You must continue to use your neckstrap until you are totally satisfied that the camera hub is securely threaded into the tripod mount or camera body. Cotton Carrier Ltd. is not responsible for the damage resulting from inadequate tightening of the camera hub.The Cotton Carrier can also be used with many of the popular tripod quick release adapters. Please note that we provide this information as a convenience to our customers and can offer no direct support for your specific configuration. We encourage you to visit the website of your product's manufacturer.

In short, you need to match whatever camera plate your tripod head is using. The Cotton Carrier Camera Insert will mount onto any quick release adapter or clamp that has a 1/4" threaded hole on the underside. Some products require (or include) a 1/4" to 3/8" threading bushing.

EXAMPLES:

If you use the Bogen Manfrotto system: consider our 323 RC2 or 394 RC4

If you use the Velbon system: consider the QRA-667L Quick Release Adapter and Plate Assembly

If you use the Kirk, Arca-Swiss, Markins, Really Right Stuff* or other tripod systems using Arca-Swiss plates: consider our Kirk QRC-2 Quick Release Clamp (which features a threaded 1/4" hole)

*If you already own a Really Right Stuff quick release clamp such as the B2-40 LR or B2-mAS which has a non-threaded hole, you will need to order our Really Right Stuff (RRS) Adapter Kit.

IMPORTANT: Along with using an Allen Key and screw driver to secure your RRS Quick Release Clamp to the Cotton Carrier Hub, we strongly recommend you use a thread locker, such as LocTite® 425 ONLY, as this is a fast curing, low strength adhesive for locking metal and plastics fasteners. If you have any spillage, it is advised to use an Acetone cleaner for any excess.

Although it should not be required with sufficient tightening of the camera hub that causes compression of the rubber washer, you may wish to use an added measure of security to keeping your camera hub on by using a NON-PERMANENT, PLASTIC SAFE Thread Locker (e.g. LocTite 425).

Other LocTite® or similar products may not be suitable for use, and are not recommended.