This product is specifically designed photographers who wish to mix 'n' match their full-frame camera bodies, bodies with a battery grip and regular camera bodies.  This system comes complete with a comfortable and durable, one-size-fits-all adjustable Camera Vest made of 1680 Denier Polypropylene material fitted with a Lexan camera receptacle.

The removable Side Holster is also made of durable 1680 Denier Polypropylene fitted with a Lexan camera receptacle. You have the choice of attaching the holster to either the Camera Vest or the Lens Bag System.

You also receive two (2) 10-degree Camera Hubs (suitable for ALL camera types) that comprise an anodized aluminum hub, a stainless steel marine grade bolt, and a high-density rubber washer.

You will also receive two (2) Camera Tethers, two (2) Hand Straps and one (1) Universal Adapter Plate.

The complete system has you ready to be up and running with one or two cameras immediately, and put an end to irritating neck strain and fatigue created by traditional camera neck straps.

• The Cotton Carrier Camera System involves moving parts that must be maintained periodically. Install and, using the included Tightening Tool, tighten the Camera Hub as TIGHTLY AS POSSIBLE, as this is what keeps your camera securely attached to your Cotton Carrier. Check it until you are satisfied it is not loosening through the turning action of the camera.
• As well as confirming the condition of both the Camera Hub and Camera Receptacle for any signs of wear or damage, keep both the Lexan Camera Receptacle and Camera Hub clean and free of any grit and debris, and clean it regularly as you would with any camera component.

We now offer compatibility with the Arca Swiss-compatible, Manfrotto, Gitzo and other brands of quick release tripod systems with our Universal Adapter Plate (model #755CUP.3).  

IMPORTANT: Along with using an Allen Key to secure your Cotton Carrier Camera Hub, we strongly recommend you use a thread locker, such as LocTite® 425 ONLY, as this is a fast curing, low strength adhesive for locking metal and plastics fasteners. If you have any spillage, it is advised to use an Acetone cleaner for any excess.

Although it should not be required with sufficient tightening of the camera hub that causes compression of the rubber washer, you may wish to use an added measure of security to keeping your camera hub on by using a NON-PERMANENT, PLASTIC SAFE Thread Locker (e.g. LocTite 425).

Other LocTite® or similar products may not be suitable for use, and are not recommended.