0 items: $0.00
credit card processing
Cotton Carrier HAND STRAP
The Cotton Carrier Hand Strap. Get the perfect companion piece to your Cotton Carrier Camera System today!
Usually Ships in 24 Hours
Compatibility with Tripod Mounts
Based on popular demand, we now provide a hand strap solution for users of our Cotton Carrier system. Installation could not be more simple: attach the strap end to the eyelet of your camera body and place the rubber gasket pad against the underside of yoru camera (or battery grip) and thread our Camera Hub (or the quick release plate you are using) through the hole in the gasket pad. It also works perfectly with our new Adapter Plates!
Includes: Hand Strap and Rubber Gasket (not required if used with our Universal Adapter Plate).
YOU MUST ALREADY OWN A COTTON CARRIER PRODUCT TO USE THIS HANDSTRAP. NO HARDWARE IS INCLUDED.
NOTE: SOME THIRD-PARTY QUICK RELEASE PLATES OR L-BRACKETS OFFER A STRAP EYELET AND ARE SUITABLE FOR USE WITH THIS PRODUCT.
The Cotton Carrier Camera System involves moving parts that must be maintained periodically. Install and, using the included Allen Key, tighten the Camera Hub as TIGHTLY AS POSSIBLE, as this is what keeps your camera securely attached to your Cotton Carrier. Check it until you are satisfied it is not loosening through the turning action of the camera.
As well as confirming the condition of both the Camera Hub and Camera Receptacle for any signs of wear or damage, keep both the Lexan Camera Receptacle and Camera Hub clean and free of any grit and debris, and clean it regularly as you would with any camera component.
We now offer compatibility with the Arca Swiss-compatible, Manfrotto, Gitzo and other brands of quick release tripod systems with our Universal Adapter Plate (model #766NHP).
Along with using an Allen Key to secure your Cotton Carrier Camera Hub, we strongly recommend you use a thread locker, such as LocTiteŽ 425 ONLY, as this is a fast curing, low strength adhesive for locking metal and plastics fasteners. If you have any spillage, it is advised to use an Acetone cleaner for any excess.
Although it should not be required with sufficient tightening of the camera hub that causes compression of the rubber washer, you may wish to use an added measure of security to keeping your camera hub on by using a NON-PERMANENT, PLASTIC SAFE Thread Locker (e.g. LocTite 425).
Other LocTiteŽ or similar products may not be suitable for use, and are not recommended.
designed to work with all cameras (full-bodied pro cameras, cameras with battery grips, or regular sized) in conjunction with your Cotton Carrier
can be configured with or without the rubber gasket to fit any camera (Canon, Nikon, Sony, Minolta, etc.)
Velcro locking strap
NOTE: If you are using this with the Manfrotto PL200 Quick Release Plate, you will require a longer bolt (466CMB REPLACEMENT Manfrotto Adapter Bolt). This is included with all our shipments of the Manfrotto 323 RC2. Or you can purchase it from our store.
REPLACEMENT Cotton Carrier Hand Strap Rubber Gasket
Share your knowledge of this product with other customers...
Be the first to write a review
Returns & Exchanges
128-bit SSL Security
Click to Verify